Sports equipment for water polo

Article: AVRE1004

Material: Durable plastic.

Dimensions: Depth: 850 mm, Top part depth: 300 mm, Height: 1800 mm, Length: from 600 to 4000 mm

Colour: Light green.

Article: AVRE1003

Material: Durable plastic.

Dimensions: Depth: 570 mm, Top part depth: 300 mm, Height: 1800 mm, Length: from 600 to 4000 mm

Colour: Light green.

Article: AVIN1022

Made in: EU

Goals for competitions and training in water polo.

Built with extruded aluminum in high-thick dust and floating in glass fiber reinforced to combine lightness.

Article: AVIN1019

Made in: EU

Material: Stainless stell AISI316

Surface: ABS

Dimensions: 32 х 1 х 0,7 m

Colour: Colours according to FINA rules

Compliance with: Made according to FINA rules

Stabilized to UV-ray. No-slip design.

Article: AVAE1001

Made in: EU

The drowning detection system studies the behaviour of the swimmers at the pool,

immediately identifying any danger situations.

The video cameras in the water probe the pool and capture images that are analyzed in real time by software.

The rescue personnel, thanks to the service monitor, can control all the activities at the bottom of

the pool.

In the event of drowning danger, the system activates a vibrating acoustic signal on the

hand-held device of the lifeguards, thus allowing immediate intervention in the exact area of the

pool.

Article: AVOT1001

Made in: EU

Technicals Features:

Since many years established instrument for perfomance diagnosis and special training.

The integrated force sensor finds out basic data for very detailed analysis and en electronic controlled resistace until generates the unique isonetik force progression.

The plotting unit shows alternatively force, work, powre, frequency or extension length.

The inegrated memory can be read out with aprinter after the exercise unit and shows the swimmer directly the result of his practise and his standard of perfomance.

Force progression can be shown, stored and compared online on the computer with the optional Swim analyzer Software.

The BIO meter is supplied complete with ropes, paddles, bench frame. The training can be started after a short assembly of Bank rack immediately.

Article: AVSS1514

Varnished sheet steel structure with rubber floor pads and chipboard worktop. Key locking drawers. Dimensions 130x76x78 cm. With 3 drawers. Made in EU.

Article: AVML1050

Made in: EU

Material: Soft and flexible PVC

Dimensions:

Available in 3 different widths:

60, 75, or 90 cm

Thickness: 12.0 mm

Information:

Sold per 10 m roll.

Available Colors:

Blue, Red, Green, Yellow, Mint, Off White, Gray, or Black (black transverse ribs underneath)

Article: 3481.931

Main unit dimensions: 376 x 215 x 245mm w/o Connectors

Microphone dimensions: 118 x 25 x 80 mm. + 7 meter cable

E-GUN dimensions 280 x 35 x 140 mm + 7 meter cable

Alarm “low battery”: Yes, 4 levels indicated as battery symbol (Empty, Low, Medium, Full)

Protection class: IP41

Power: Built in 12 Volt / 7 Ah Sealed lead-acid battery

Standby time: 24 Hours (1000 starts). After this, the unit should still be operable for 1 hour.

The self-discharge time is approximately 12 months if not in use.

An external 12V Lead/Acid battery (car battery) connected to the charger input, could be used if extended operation time is needed.

Charger: Max. initial current: 1.0 Ah (only for use in dry environment).

Speakers: Load 3.2 - 16 Ohms

Output speakers: @13.2 Volts, 3.2 Ohms, 1 kHz Typical: 2 * 13 Watt with < 10 % Distortion Maximum: 2 * 19 Watts with 10 % Distortion

Storage temperature: -20ºC to +65ºC

Working temperature: -10ºC to +65ºC

Relative humidity: (20%-80%) without condensation

Manufacturer Swiss Timing (Switzerland)

Article: AVML1003

Made in: EU

Material: Polythene with UV protection.

Color: Yellow and Red

Kit includes:

21 Yellow and 4 Red Donut Floats

92 Yellow and 8 Red Classic Discs 100mm

1 meter requires 24 Discs and 6 Donut Floats.

Wire 4mm sold seperately